Digital Temperature Controller Thermostat 16A EU Plug with Timer & Sensor Probe for Heating/Cooling Equipment - Backlight Display & Memory Function

Smart Best Recommend
4 Reasons to Buy
Precise temperature control technology
Dual mode adjustment: supports intelligent switching of heating/cooling equipment, temperature control range covers -30 ° C to 120 ° C, with an error of ± 0.5 ° C
Sensor linkage: External high-sensitivity probe monitors environmental temperature in real-time, increasing response speed by 50% compared to built-in sensors

Efficient Energy Management
16A high current load: compatible with 3680W high-power equipment (such as greenhouse heaters/industrial refrigerators), avoiding overload risks
Timer programming function: can set 15 to 80 minute loop tasks to optimize energy consumption in scenarios such as fish tanks/incubators

User experience optimization
Backlit memory screen: Clear display of data at night, automatically saves the last set parameters after power failure
EU compliant plug: CE certified, compatible with European standard sockets, with a safety protection level of IP20

Multi scenario adaptability
Agricultural/Aquatic Applications: Designed for constant temperature requirements in greenhouses and aquariums, moisture resistant probes can be used underwater
Home/Commercial Compatibility: Wide Voltage Design (110V-230V), Global Voltage Adaptation

Customer Service Update
Performance Data
Dual mode temperature control accuracy
• Supports automatic switching between heating and cooling modes, with a measured temperature difference control accuracy of ± 0.5 ℃ (after NTC sensor calibration)
Under a high current load of 16A, there is no overheating phenomenon after continuous operation for 72 hours
Reliability of timing function
Countdown error<0.1% (laboratory environment testing)
• Supports 24-hour loop programming, compatible with wall mounted boilers/underfloor heating and other equipment
Human Computer Interaction Design
Backlit display screen maintains clear visibility even in low light environments
The power-off memory function can save the last 3 sets of set parameters

Customer after-sales service
Use Tips
Installation configuration
Connect the EU plug to a 220V power supply and fix the probe in the monitoring area (avoid direct contact with the heating element)
Press and hold the SET button for 3 seconds to enter temperature calibration mode (requires the use of a standard thermometer)
Mode switching
Heating mode: When the temperature is below the set value, the output relay is activated
Cooling mode: When the temperature exceeds the set value, a control signal is triggered
Timer setting
Short press the TIMER key to set the countdown (00:01-99:59 hours/minute)
Long press TIMER+SET key to save loop program