Medical-Grade Smart Toilet with Auto Flush ADA Compliant for Disabled & Elderly Users

Smart Best Recommend
6 Reasons to Buy
Accessibility adaptation
Specially designed for people with limited mobility, the seat cushion height meets ADA standards (42-48cm), making wheelchair transfer convenient
The emergency call button on the side supports waterproof triggering, and the hospital's measured response delay is less than 0.5 seconds

Health security system
Nano silver ion coated ceramic surface, laboratory tests show antibacterial rate>99.6%
Contactless automatic flushing (infrared sensing distance 0.3-0.8m) to avoid cross infection

Comfort optimization
Three level seat heating (adjustable from 30-40 ℃), significantly improving the body feel during winter use
Dual mode cleaning (women's wash/hip wash) with independently adjustable water pressure, suitable for postoperative patients

Installation and maintenance advantages
The floor standing structure can support up to 200kg, which is 37% more stable than the wall mounted structure
The replacement cycle of the built-in water quality filter reaches 12 months, reducing maintenance costs

Multi environment compatibility
The moisture-proof circuit board design has passed IPX4 certification and is suitable for hotel high humidity bathrooms
Nighttime low light illumination function (<5 lumens) meets the low light requirements of hospital wards

Cost effectiveness
Compared to wall mounted models, it saves 30% of installation costs without the need to modify the wall structure
Ceramic glaze anti fouling test shows a 52% reduction in cleaning agent usage

Sales Manager Discount
UP TO 39% OFF
The discount information has been released!
Place your order now and we will ship your order at the discounted price as soon as possible.
Original price of 750 is now only 450, this item is 39% off!
Please note the expiration date of the discount.

Customer Service Update
Latest Evaluation
Basic parameters
Adopting Siphon Jet Flushing technology, with a single flush volume of ≤ 4.8L, meeting the WaterSense water-saving certification standard
The ceramic glaze has passed the PA antibacterial test, with a 24-hour antibacterial rate of ≥ 99.3%
Intelligent functions
Support contactless automatic flushing (infrared sensing distance 30-80cm), response time 0.3 seconds
The seat ring heating can be adjusted in three levels (30 ℃/35 ℃/40 ℃), and it takes 90 seconds to heat up to the set temperature
Structural Design
One Piece structure can bear 200kg, increasing stability by 25% compared to the one-piece structure
Soft Close design of seat ring, opening and closing noise<35 decibels

Customer after-sales service
Use Tips
Installation points
295mm or 380mm drainage pipe spacing (S-Rap design) needs to be reserved, and the pit spacing needs to be confirmed before installation
Must be connected to a 220V power supply, it is recommended to pair it with a leakage protection switch
Function settings
Long press and hold the "SPRAY" button on the remote control for 3 seconds to adjust the intensity of the washing water flow for women (5 levels available)
Press the "FLUSH" button twice in a row to activate the strong flushing mode
Maintenance mode
Clean the nozzle with neutral detergent every month (self-cleaning program cannot remove scale)
Filter should be replaced every 6 months (counterclockwise rotation for disassembly)

Customer after-sales service
Usage Guidelines
Usage restrictions
When the ambient temperature is below 5 ℃, the seat heating function should be turned off to prevent circuit damage
Do not use chlorine bleach to clean ceramic surfaces, as it can cause oxidation of the glaze surface
Fault handling
Flushing delay exceeds 2 seconds: Check if the inlet valve filter is clogged
Seat ring not heating: prioritize checking if the power socket is powered on
Special scenario adaptation
It is recommended to enable the normally open mode (24-hour standby) for hospital use
The hotel installation requires the night lighting function to be turned off to avoid disturbing guests